Photovoltaic (PV) Solar DC Cable/Wire – 10 SQM

800 5,500 (0% OFF)

  • UV Protection
  • Lifetime reliability
  • Extreme Temp. Range -40°C to 120°C
  • Ozone Resistant
  • Halogen Free: Low Smoke Emission
  • Tin Plated Copper for increased current capacity

Solar DC cables/wire are designed for connecting photovoltaic power supply systems. They are dedicated to the photovoltaic system direct current (D.C.) side with a nominal D.C. voltage of a 1.5kV. These cables can be used indoor & outdoor for flexible and fixed installations with high mechanical strength in extreme weather conditions. Solar cables are designed to withstand the demanding environmental conditions that arise in any fixed, mobile, roof or architecturally integrated photovoltaic installation.

These cables are suitable for permanent outdoor long-term use, under variable and harsh climate conditions. They are designed and tested to operate at a normal maximum conductor temperature of 90°C and for 20,000 hours up to 120°C. Therefore, the expected period use is 30 years under normal usage conditions.

Solar Cable Conductor

Flexible Electrolytic Tinned fine copper strands, acc. To IEC 60228, class 5

DC Cable Inner Insulation

Crosslinked Halogen Free & Flame Retardant Insulation in White, Red Or Black color

Solar Cable Outer Sheath

Crosslinked Halogen Free & Flame Retardant UV and ozone resistant Sheath in Black color Or Black with Red color

Constituents :-

  • Zero Halogen Polyolefin Compound
  • Annealed Tinned Copper Conductor
  • Cross Linked Polyolefin Compound

Mechanical Features

  • Resistant to Impact, tear & abrasion
  • Minimum bending radius – 4 times of overall diameter.
  • Safe pulling force -50 N/sq mm

Thermal Features

  • Maximum conductor temperature of operation-120°C.
  • Minimum operating temperature: -40°C

Electrical Features

  • Voltage Rating : 1.5 (1.8) KV DC
  • High voltage test : 6.5 KV DC for 5 minutes.

Chemical Features

  • Resistant to mineral oils
  • Resistant to acids & alkaline
Weight N/A
Dimensions N/A
Brand

HPL

Nominal Cross Sectional Area

10 sqmm

Nos./Max. Dia of Strand No./ (mm)

80 / 0.40

Nominal Thickness of Insulation

0.7 mm

Nominal Thickness of Sheath

0.8 mm

Mean Overall Diameter

8.8 mm

Current Rating (In Air)

98 Amp.

Current Rating (On Surface)

93 Amp.

Current Rating (2 Adj. Cables on Surface)

79 Amp.

Conductor Resistance at 20°C Max. ohm/Km

1.95

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.